SNA NRJE Node Managers Guide (30292-90007)

Appendix A 177
Result Codes and Messages
SNA NRJE Error Messages
415 MESSAGE: NOT ENOUGH STACK SPACE. (MAN=415)
CAUSE: If this message appears when executing the NRJE subsystem,
then a severe error has occurred.
ACTION: See “Problem Resolution” in Chapter 5 , “SNA NRJE
Troubleshooting,” of this manual, and contact your HP representative
for assistance.
CAUSE: If this problem took place during the execution of a user
program, then the NRJE intrinsics did not have sufficient stack space.
ACTION: PREP or RUN the user program with a larger STACK= StackSize
parameter.
416 MESSAGE: SPLIT STACK CALL IS NOT ALLOWED. (SEV=416)
CAUSE:
ACTION:
418 MESSAGE: THE OUTPUT LIST IS TOO SHORT IN NXDSLULIST.
(SEV=418)
CAUSE:
ACTION:
419 MESSAGE: WORKSTATION ENTRY IS IN PENDING STATE. (MAN=419)
CAUSE: Attempt to start a workstation that is in the pending activation
state. Pending state is the state when the workstation is about to be
active.
ACTION:
420 MESSAGE: WORKSTATION ENTRY IS IN MONITOR PENDING STATE.
(MAN=420)
CAUSE: Attempt to start or stop a workstation but it is in the monitor
pending state. Monitor pending state is the state when workstation
monitor is about to be active.
ACTION:
421 MESSAGE: WORKSTATION ENTRY IS NOT IN ACTIVE OR INITIALIZED
STATE. (MAN=421)
CAUSE:
ACTION:
422 MESSAGE: A SEVERE ERROR OCCURRED IN THE DICTIONARY
SUBSYSTEM. (SEV=422)
CAUSE:
ACTION: