SNA NRJE Node Managers Guide (30292-90007)

164 AppendixA
Result Codes and Messages
SNA NRJE Error Messages
248 MESSAGE: DATA PRECEDES JOB CARD IN INPUT FILE #!. (INT=248)
CAUSE: Only host console commands and ##FD records that include
host console commands are allowed prior to the first nontransparent job
card. Something else was encountered. The ! parameter is the number
of the file in the order input to SUBMIT or NRJE2Submit.
ACTION: Correct the job stream.
249 MESSAGE: UNABLE TO OPEN OUTPUT SPOOL FILE. INPUT FILE #!.
(INT=249)
CAUSE: A file system related error. A file system error message will
appear after this message. The ! parameter is the number of the file
being processed in order input to SUBMIT or NRJE2Submit.
ACTION: Determine the cause by inspecting the file system error
message and correct the problem.
250 MESSAGE: UNABLE TO REWIND FILEQ TEMPORARY FILE. (INT=250)
CAUSE: A file system related error. A file system error message follows
this message.
ACTION: Determine the cause by inspecting the file system error
message and correct the problem. Notify Hewlett-Packard if you cannot
determine the cause.
251 MESSAGE: THE NRJE LOGICAL READER IS INCORRECTLY
CONFIGURED. (INT=251)
CAUSE: The NRJE logical reader should be configured as a type 2,
subtype 22 device.
ACTION: Correct the reader configuration.
252 MESSAGE: $NULL, $STDLIST, $NEWPASS NOT ALLOWED AS INPUT
FILES. (INT=252)
CAUSE: These system files are not allowed as input to SUBMIT or
NRJE2Submit.
ACTION: Correct and reissue.
253 MESSAGE: PRINT DESTINATION MUST BE LESS THAN 86
CHARACTERS. (INT=253)
CAUSE: The print destination for SUBMIT or NRJE2Submit must be
between 1 and 86 characters if one is supplied.
ACTION: Correct the print destination.
254 MESSAGE: PUNCH DESTINATION MUST BE LESS THAN 86
CHARACTERS. (INT=254)
CAUSE: The punch destination for SUBMIT or NRJE2Submit must be
between 1 and 86 characters if one is supplied.