SNA NRJE Node Managers Guide (30292-90007)

Chapter 6 121

Commands

TRACEOFF

Turns off intrinsic and/or LU tracing for a workstation.

Syntax

TRACEOF[F][;W[SID]=

Wsid

][;TRACE=

Type

]]

Parameters

Wsid

The workstation name. This can be up to eight

alphanumeric characters long; the ﬁrst letter must be

alphabetic.

If you omit this parameter, the default workstation

identiﬁer is used. You can specify a default workstation

identiﬁer in the NRJE command.

Type

The type of trace to be stopped:

• LU: for NRJE LU procedures.

• INTRINSIC: for commands and intrinsics accessed

by NRJE workstation users and operators.

If you omit this parameter, all tracing that is on is

turned off.

Description

This command is used to turn off intrinsic and/or LU tracing for all

active LU-LU sessions of a workstation. Tracing is described in Chapter

5 , “SNA NRJE Troubleshooting,” of this manual. You can specify a

particular workstation by specifying a

Wsid

Text Reference

See NRJECONTROL TRACEOFF earlier in this chapter. NRJETrace is the

manager intrinsic counterpart of this command; it is described in the

SNA NRJE User/Programmer Reference Manual.