SNA NRJE Node Managers Guide (30292-90007)

Chapter 6 107
Commands
PURGE
PURGE
Purges entries in the NRJE Joblog.
This command does not apply if you are connected to a VSE/POWER
host system.
Syntax
{ALL}
PUR[GE] {O[LD][;DATE= Date [;TIME= Time {AM}]]}[;W[SID]= Wsid ]
{PM}
Parameters
ALL Empties the Joblog file. NRJE prompts you with
PURGE ENTIRE JOBLOG, (Y/N)?
OLD Purges entries for cancelled jobs and jobs that were
placed in the Joblog prior to the specified date and time.
(Entries are placed in the Joblog at the time of
transmission to the host.)
OLD also causes entries for jobs that were transmitted
to the host, but not acknowledged as having been
received, to be purged.
Date The date in the custom date format for the language in
use.
Default: yesterday
Time The time in the custom time format for the language in
use.
Default: 12:01 a.m.
Wsid The workstation name. This can be up to eight
alphanumeric characters long; the first character must
be alphabetic.
If you omit this parameter, the default workstation
identifier is used. You can specify a default workstation
identifier in the NRJE command.