SNA Link/iX Node Managers Guide (30291-90507)

66 Chapter2
SNA Node and Link Configuration
Configuring the SNA Node and Link
If the PSI is in slot 6, the Physical Path is 24
(4 multiplied by 6).
Example:
• If two card cages are present:
PathNumber/ ( 4 X SlotNumber )
where (a)
PathNumber is a number corresponding to
the card cage the PSI is in:
Card cage 0: PathNumber = 2 Card cage 1:
PathNumber = 6
(b) / is the slash character (
not the division sign), (c)
the parentheses are used to set off the arithmetic
formula (they are
not entered as part of the
Physical Path value), (d) X is the multiplication
sign (
not the character “X”), and (e) SlotNumber is
the number of the slot, within the card cage, the PSI
is in.
Examples:
If the PSI is in card cage 0, slot number 4, the
Physical Path is
2/16
(
PathNumber , slash character, 4 multiplied by 4).
If the PSI is in card cage 1, slot number 3, the
Physical Path is
6/12
(
PathNumber , slash character, 4 multiplied by 3).
Receive Timeout
Required. The number of seconds the SDLC link
driver will wait for the remote system poll before
closing the line. If 0 is specified, no timeout occurs.
Range: 0, 30-1800 (integer)
Recommended value: 180 (30 in Europe)
Default: 180
Local Timeout
Required. The number of seconds the SDLC link
driver waits for PSI card activity, before informing SNA
Transport that the PSI is down and the link driver is
going down.