SNA Link/iX Node Managers Guide (30291-90507)

58 Chapter2

SNA Node and Link Conﬁguration

Conﬁguring the SNA Node and Link

LU Data Screen

Once you have speciﬁed the PU information, you are ready to specify

LU information. Refer to Figure 2-5, “LU Data Screen.” Select this

screen by pressing

[f2] (Go To LUDATA) on Figure 2-4, “PU Data Screen.”

(You can go directly to this screen from any screen by typing

@SNANODE.

nodename

.LUDATA in the command window and pressing

[ENTER].)

Figure 2-5 LU Data Screen

Fields Path

For display only. The NMMGR path to this screen. It

includes the name of the SNA node you are conﬁguring.

Logical Unit Data

Information about the LUs to be conﬁgured for this

node. You can conﬁgure a maximum 256 LUs for each

node.

LU Name The remote system name (

not

the

Network Addressable Unit [NAU]

number) of the LU. The name can be up

to eight alphanumeric characters long;

the ﬁrst character must be alphabetic.

Note that

at least one

LU Name must

be speciﬁed.