SNA Link/iX Node Managers Guide (30291-90507)

Chapter 2 51
SNA Node and Link Configuration
Configuring the SNA Node and Link
SNA Node Configuration Screen
After you have selected SNA node and link configuration, NMMGR
displays the “SNA Node Configuration” screen, shown in Figure 2-3.
(You can go directly to this screen from any screen by typing @SNANODE
in the command window and pressing
[ENTER].) Here you specify
information about the new SNA node you are configuring or the
existing node you are modifying.
Figure 2-3 SNA Node Configuration Screen
Fields Path
For display only. The NMMGR branch you are in.
SNA Node Name
The name of the new SNA node you are configuring or
the existing node whose configuration you are
modifying. The name can be up to eight alphanumeric
characters long; the first character must be alphabetic.
Host Configuration:
• SNA/SDLC: For troubleshooting purposes, we
recommend that the PUNAME operand of the PU macro
match this field, refer to Table 2-1.
• SNA/X.25 (PVC): For troubleshooting purposes, we
recommend that the PUNAME operand of the X25.PU
macro match this field, refer to Table 2-2.