SNA Link/iX Node Managers Guide (30291-90507)

32 Chapter2
SNA Node and Link Configuration
AS/400 Configuration Overview
AS/400 Configuration Overview
Before communication between the HP e3000 and the IBM SNA AS/400
system is possible, both systems must be configured. The AS/400
configuration should be done first, and it consists of specifying values
for certain parameters.
The AS/400 configuration must be coordinated with the SNA node
configuration on the HP e3000. Coordination between the AS/400
system and the SNA services also must be done. The relationships
between AS/400 parameters and HP e3000 configuration values are
explained later in this chapter and in the Node Manager’s Guide for
each SNA service. Your IBM system programmer should send copies of
the AS/400 configuration to you or your Hewlett-Packard support
contact, so that this coordination can be accomplished.
The HP SNA Products Remote System Configuration Guide explains
AS/400 configuration for the SNA links.