SNA Link/iX Node Managers Guide (30291-90507)

Appendix A 271
Messages
LAN Error Messages
150 MESSAGE: Unable to send dump request message to dump manager.
CAUSE: A call to a system message SEND routine returned in error. The
dump manager port is not operating with required capabilities.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
151 MESSAGE: Unexpected timer event message.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
152 MESSAGE: Unimplemented message received.
CAUSE: The message descriptor is not known to the driver.
ACTION: Call your Hewlett-Packard representative and explain what
you are trying to do.
160 MESSAGE: Nil configuration pointer.
CAUSE: A user passed a nil configuration pointer to the driver.
ACTION: Call your Hewlett-Packard representative and explain what
you are trying to do.
161 MESSAGE: Trace manager overrun.
CAUSE: The driver is generating trace entries faster than the trace
manager can process them. This causes some trace entries to be lost.
ACTION: This is only a warning and is indicative of a very busy system.
If not debugging a problem, then tracing should be turned off. This will
improve system performance in general. If a problem is being looked at,
use partial tracing whenever possible (when full data frames are not
needed) to ensure that no trace data is lost.
176 MESSAGE: Type 2 connection attempt failed.
CAUSE: The remote system did not respond to a SABME with a UA.
ACTION: Check that the remote is activated, and make sure the local
and remote MAC addresses, and SAPs are correctly configured.
177 MESSAGE: Type 2 error during reset or disconnect.
CAUSE: The remote system did not respond to a SABME or DISC with a
UA.
ACTION: Disregard if the connection is working properly, and no other
errors occurred. If the connection will not function or other errors have
occurred, write down the error information and contact your
Hewlett-Packard support contact.