SNA Link/iX Node Managers Guide (30291-90507)

270 AppendixA
Messages
LAN Error Messages
125 MESSAGE: The driver detects unknown option in the 802.2 control
field of a test or xid packet.
CAUSE: The problem is caused by a bad packet.
ACTION: If this error appears repeatedly, write down the error
information displayed on the console and call your Hewlett-Packard
support contact.
144 MESSAGE: Dump request received when driver is dumping.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
145 MESSAGE: Message received in invalid state.
CAUSE: The link driver received an unexpected message.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
146 MESSAGE: Driver detected unsupported command in received SDI or
WAN control message.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
147 MESSAGE: Unknown driver problem.
CAUSE: The driver detected an error, but did not say what type of error
was found.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
148 MESSAGE: Unknown dump manager port number.
CAUSE: The driver detects unrecoverable error and tries to dump its
PDA and the NIO LAN/console card but the dump module is missing.
ACTION: Run NMMAINT to verify that the dump module is present.
149 MESSAGE: Unable to obtain an I/O Services timer for a dump
process.
CAUSE: A call to obtain a timer resource returned an error. Too many
timers may be in use.
ACTION: If you suspect your system might be low on timer resources be
cause of heavy loading, try restarting the link later. If repeated
attempts fail, try warmstarting your system. If the problem persists, a
system dump will be required. Call your Hewlett-Packard support
contact.