SNA Link/iX Node Managers Guide (30291-90507)

246 AppendixA
Messages
X.25 Link Module Configurator Error Codes
node can still function, but link status information cannot be retrieved.
ACTION: Call your Hewlett-Packard support contact.
-205 MESSAGE: STATUS REPLY INVALID
CAUSE: The module configurator status routine received an invalid
status reply. Note that the node can still function, but link status
information cannot be retrieved.
ACTION: Call your Hewlett-Packard support contact.
-500 MESSAGE: UNABLE TO RECEIVE OPENLINK COMPLETION
MESSAGE
CAUSE: The module configurator encountered an error while trying to
receive the OpenLink completion message.
ACTION: Call your Hewlett-Packard support contact.
-501 MESSAGE: UNABLE TO GET MSG FRAME FOR CLOSELINK
REQUEST
CAUSE: The module configurator encountered an error while trying to
allocate the CloseLink request message.
ACTION: Call your Hewlett-Packard support contact.
-502 MESSAGE: UNABLE TO SEND CLOSELINK REQUEST
CAUSE: The module configurator encountered an error while trying to
send the CloseLink request message.
ACTION: Call your Hewlett-Packard support contact.
-503 MESSAGE: UNABLE TO RECEIVE CLOSELINK COMPLETION
MESSAGE
CAUSE: The module configurator encountered an error while trying to
receive the CloseLink completion message.
ACTION: Call your Hewlett-Packard support contact.
-504 MESSAGE: UNABLE TO GET MSG FRAME FOR TRACE ENABLE
REQUEST
CAUSE: The module configurator encountered an error while trying to
allocate the trace enable request message.
ACTION: Call your Hewlett-Packard support contact.
-505 MESSAGE: UNABLE TO SEND TRACE ENABLE REQUEST
CAUSE: The module configurator encountered an error while trying to
send the trace enable request message.
ACTION: Call your Hewlett-Packard support contact.