SNA Link/iX Node Managers Guide (30291-90507)

Appendix A 235
Messages
SNA Transport Logging Messages
version, NMCONFIG.PUB.SYS, a console logging list, and time and date of
error to the Hewlett-Packard support contact.
MESSAGE: Remote node did not support PU type 2.1 on node
NodeName
CAUSE: The remote node is not a PU type 2.1 node.
ACTION: Ask the remote system administrator to reconfigure the
system to support PU type 2.1.
MESSAGE: Request not allowed in current state
CAUSE: SNA Transport has received an unexpected request.
ACTION: Call your Hewlett-Packard support contact.
MESSAGE: SDI connect reply failure on node
NodeName
CAUSE: SNA Transport cannot establish the LLC link connection.
ACTION: Software internal error. Submit node trace, SNA/Transport
version, NMCONFIG.PUB.SYS, and console logging list to the
Hewlett-Packard support contact.
MESSAGE: SDI connect request failure on node NodeName
CAUSE: SNA Transport cannot establish the LLC link connection.
ACTION: Software internal error. Submit node trace, SNA/Transport
version, NMCONFIG.PUB.SYS, and console logging list to the
Hewlett-Packard support contact.
MESSAGE: SDI disconnect reply failure on node NodeName
CAUSE: SNA Transport cannot disconnect the LLC link connection.
ACTION: Software internal error. Submit node trace, SNA/Transport
version, NMCONFIG.PUB.SYS, and console logging list to the
Hewlett-Packard support contact.
MESSAGE: SDI disconnect request failure on node NodeName
CAUSE: SNA Transport cannot disconnect the LLC link connection.
ACTION: Software internal error. Submit node trace, SNA/Transport
version, NMCONFIG.PUB.SYS, and console logging list to the
Hewlett-Packard support contact.
MESSAGE: SDI rendezvous reply failure on node NodeName
CAUSE: SNA Transport cannot establish the LLC link connection
ACTION: Software internal error. Submit node trace, SNA/Transport
version, NMCONFIG.PUB.SYS, and console logging list to the
Hewlett-Packard support contact.