SNA Link/iX Node Managers Guide (30291-90507)

190 AppendixA
Messages
SDLC Link Driver Error Messages
1020 MESSAGE: PSI reported an unknown severe error type.
CAUSE: Unknown.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
1023 MESSAGE: Unable to obtain IODC information from
IO_GET_MODULE_REC during initialization.
CAUSE: Unknown.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
1024 MESSAGE: Unsupported module type in IODC.
CAUSE: Bad PSI hardware.
ACTION: Your Hewlett-Packard support contact will have to run
diagnostics on the PSI.
CAUSE: Wrong path name in NMMGR.
ACTION: Use NMMGR or the configuration file critical summary to
verify that the configured Physical Path is correct.
CAUSE: Wrong card type.
ACTION: Verify that the target card is a PSI card.
1025 MESSAGE: Unsupported software model in IODC.
CAUSE: Bad PSI hardware.
ACTION: Your Hewlett-Packard support contact will have to run
diagnostics on the PSI.
CAUSE: Wrong path name in NMMGR.
ACTION: Use NMMGR or the configuration file critical summary to
verify that the configured Physical Path is correct.
CAUSE: Wrong card type.
ACTION: Verify that the target card is a PSI card.
1026 MESSAGE: Incompatible software version in IODC.
CAUSE: The version of the PSI is not compatible with this driver.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
1027 MESSAGE: PSI did not return to a ready state after a reset was
issued.
CAUSE: Bad PSI hardware.
ACTION: Your Hewlett-Packard support contact will have to ru2