SNA Link/iX Node Managers Guide (30291-90507)

Appendix A 189
Messages
SDLC Link Driver Error Messages
1014 MESSAGE: PSI detected a bad checksum during download.
CAUSE: The download file PSISDLC0.PUB.SYS or PSISDLC1.PUB.SYS is
corrupt.
ACTION: Replace the download file from your latest system update tape.
CAUSE: An incorrect version of the download file PSISDLC0.PUB.SYS or
PSISDLC1.PUB.SYS is installed.
ACTION: Check the version of the download file with NMMAINT and
call your Hewlett-Packard support contact if it is incorrect.
1015 MESSAGE: PSI received download blocks out of sequence.
CAUSE: The download file PSISDLC0.PUB.SYS or PSISDLC1.PUB.SYS is
corrupt.
ACTION: Replace the download file from your latest system update tape.
CAUSE: An incorrect version of the download file PSISDLC0.PUB.SYS or
PSISDLC1.PUB.SYS is installed.
ACTION: Check the version of the download file with NMMAINT and
call your Hewlett-Packard support contact if it is incorrect.
1016 MESSAGE: Attempt to download to a bad card address.
CAUSE: The download file PSISDLC0.PUB.SYS or PSISDLC1.PUB.SYS is
corrupt.
ACTION: Replace the download file from your latest system update tape.
CAUSE: An incorrect version of the download file PSISDLC0.PUB.SYS or
PSISDLC1.PUB.SYS is installed.
ACTION: Check the version of the download file with NMMAINT and
call your Hewlett-Packard support contact if it is incorrect.
1017 MESSAGE: PSI reported an undefined error during download.
CAUSE: Unknown.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
1018 MESSAGE: PSI detected a severe internal error.
CAUSE: Unknown.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
1019 MESSAGE: PSI detected a severe error on the backplane.
CAUSE: Unknown.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.