SNA Link/iX Node Managers Guide (30291-90507)

188 AppendixA
Messages
SDLC Link Driver Error Messages
ACTION: Your Hewlett-Packard support contact will have to run
diagnostics on the PSI.
1007 MESSAGE: Unknown PSI fatal error.
CAUSE: The download file PSISDLC0.PUB.SYS or PSISDLC1.PUB.SYS is
corrupt.
ACTION: Replace the download file from your latest system update tape.
CAUSE: Bad PSI hardware.
ACTION: Your Hewlett-Packard support contact will have to run
diagnostics on the PSI.
1009 MESSAGE: The PSI received more data from your HP system than its
internal buffers could handle.
CAUSE: Unknown.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
1010 MESSAGE: The PSI Received a bad command from the driver.
CAUSE: Unknown.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
1011 MESSAGE: PSI received a bad DMA command from the driver
CAUSE: Unknown.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
1012 MESSAGE: Unknown PSI module dependent hard error.
CAUSE: Unknown.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard support contact.
1013 MESSAGE: The PSI detected a bad length count during download.
CAUSE: The download file PSISDLC0.PUB.SYS or PSISDLC1.PUB.SYS is
corrupt.
ACTION: Replace the download file from your latest system update tape.
CAUSE: An incorrect version of the download file PSISDLC0.PUB.SYS or
PSISDLC1.PUB.SYS is installed.
ACTION: Check the version of the download file with NMMAINT and
call your Hewlett-Packard support contact if it is incorrect.