SNA Link/iX Node Managers Guide (30291-90507)

156 Chapter6
MPE Commands
SNACONTROL STATUS
where IBMNODE is already active, and a permanent virtual circuit
(PVC) is being used, could generate this display:
LINKNAME : IBMNODE LINKTYPE : SNA X.25 LINKSTATE:
SNA CONNECTED
TRACING : ON TRACEFILE: TRACE.PUB.SYS
LINK CONFIGURATION DATA:
NINAME : X25NI
INACTIVITY TIMEOUT: 0
VC TYPE : PVC
PVC NUMBER : 10
LINK STATISTICS:
SENT RECEIVED
-- ----
TOTAL BYTES : 8100 TOTAL BYTES : 8100
DATA BYTES : 8080 DATA BYTES : 8080
CONTROL BYTES : 20 CONTROL TYPES : 20
TOTAL PACKETS : 10 TOTAL PACKETS : 10
DATA PACKETS : 8 DATA PACKETS : 8
CONTROL PACKETS: 2 CONTROL PACKETS: 2
NAME TYPE NAU STATE USER TRACE FILE
======== ======= ====== ========== =============== =========================
XPORTPU PU_SSCP 0 ACTIVE MANAGER.SYS OFF
XPORTLU LU_SSCP 1 ACTIVE MANAGER.SYS OFF
XPORTLU LU_SSCP 2 ACTIVE MANAGER.SYS OFF
XPORTLU LU_SSCP 3 ACTIVE MANAGER.SYS OFF
XPORTLU LU_SSCP 4 ACTIVE MANAGER.SYS OFF
XPORTLU LU_SSCP 5 ACTIVE MANAGER.SYS OFF
XPORTLU LU_SSCP 6 RESET MANAGER.SYS OFF
PFA2 DEP_LU 2 PEND_ACT_R PITEST.PUT21R40 NMTC0090.PUB.SYS
PFA3 DEP_LU 3 ACTIVE PITEST.PU2140 OFF
PFA4 DEP_LU 4 PEND_RST_R PITEST.PU2140 OFF
PFA5 DEP_LU 5 PEND_SON PITEST.PU2140 OFF
PFACLASS DEP_LU 1 RESET PITEST.PU2140 OFF
NAME TYPE LFSID STATE USER TRACE FILE
======== ======= ====== ========== =============== =========================
INDLU1 IND_LU 1,0200 PEND_ACT_L PITEST.PUT21R40 OFF
INDLU2 IND_LU 1,0201 PEND_RST_L PITEST.PUT21R40 OFF
INDLU3 IND_LU 1,0202 PEND_RST_N PITEST.PUT21R40 OFF
INDLU4 IND_LU RESET PITEST.PUT21R40 OFF