SNA Link/iX Node Managers Guide (30291-90009)

94 Chapter3
Logging Configuration
Configuring Logging
Then, if you do not want to configure logging
information for other SNA subsystems, press
[f5]
(Validate HP-IBM) to validate the logging
configuration you just did. Once the logging
configuration is validated, press
[f4] (Exit Logging) to
return to the “HP-IBM Configuration” screen.
If you want to configure logging information for other
SNA subsystems, (1) press
[f8] (Prior Screen) once,
which places you at the “IBM Logging Configuration
(2)” screen (described earlier in this chapter); or (2)
press
[f8] (Prior Screen) twice, which places you at the
“IBM Logging Configuration (1)” screen (described
earlier in this chapter).
Enabling Users for a Specific Subsystem and Class
If you want the logging events for only a specific logging subsystem
and class to be displayed at the list devices of users, you can do it
through the “Logging Configuration: Class Data” screen as shown in
Figure 3-6. You go directly to this screen from any screen by typing
@LOGGING.
subsystemname.classname in the command window and
pressing
[ENTER].
Figure 3-6 Class Data Screen Example