SNA Link/iX Node Managers Guide (30291-90009)

84 Chapter3
Logging Configuration
Configuring Logging
Figure 3-2 HP-IBM Configuration Screen
To select logging, press
[f1] (Go To LOGGING).
IBM Logging Configuration (1) Screen
After you have selected logging configuration, NMMGR displays the
“IBM Logging Configuration (1)” screen, as shown in Figure 3-3. Here
you specify logging information for these subsystems: SNA Transport,
NRJE, and DHCF.
If you want to specify logging information for an SNA subsystem not
shown on this screen, press
[f1] (Next Screen) once, which places you
at the “IBM Logging Configuration (2)” screen, or twice, which places
you at the “IBM Logging Configuration (3)” screen. Each of these
screens is described later in this chapter.