SNA Link/iX Node Managers Guide (30291-90009)

Chapter 2 49
SNA Node and Link Configuration
Configuring the SNA Node and Link
HP-IBM Configuration Screen
From the screen shown in Figure 2-2, you can select the item you want
to configure.
Figure 2-2 HP-IBM Configuration Screen
To select SNA node and link configuration, press
[f2] (Go To SNANODE).
SNA Node Configuration Screen
After you have selected SNA node and link configuration, NMMGR
displays the “SNA Node Configuration” screen, as shown in Figure 2-3.
(You can go directly to this screen from any screen by typing @SNANODE
in the command window and pressing
[ENTER].) Here you specify
information about the new SNA node you are configuring or the
existing node you are modifying.