SNA Link/iX Node Managers Guide (30291-90009)

Appendix A 269
Messages
LAN Error Messages
208 MESSAGE: Type 2 non-fatal protocol error.
CAUSE: An unexpected packet format was received.
ACTION: Disregard if the connection is working properly, and no other
errors occurred. If the connection will not function or other errors have
occurred, write down the error information and contact your
Hewlett-Packard support contact.
209–210 MESSAGE: Type 2 non-fatal software error.
CAUSE: A non-fatal Type 2 driver software error occurred.
ACTION: Disregard if the connection is working properly, and no other
errors occurred. If the connection will not function or other errors have
occurred, write down the error information and contact your
Hewlett-Packard support contact.
211 MESSAGE: Type 2 non-fatal protocol error.
CAUSE: An unexpected packet format was received.
ACTION: Disregard if the connection is working properly, and no other
errors occurred. If the connection will not function or other errors have
occurred, write down the error information and contact your
Hewlett-Packard support contact.
224 MESSAGE: Could not read the link name from the LSS link table.
CAUSE: The link table does not exist.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
225 MESSAGE: Could not add the link name to the LSS link table.
CAUSE: The link table does not exist.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
226 MESSAGE: Could not delete the link name from the LSS link table.
CAUSE: The link name specified the LAN_KILL_MODULE call is not in
the LSS link table.
ACTION: Write down the error information displayed on the console,
submit an SR, and call your Hewlett-Packard support contact.
227 MESSAGE: Could not read multicast addresses table.
CAUSE: The multicast addresses table does not exist.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.