SNA Link/iX Node Managers Guide (30291-90009)
Table Of Contents
- 1 SNA Links Overview
- 2 SNA Node and Link Configuration
- 3 Logging Configuration
- 4 SNA Node Startup and Shutdown
- 5 SNA Link Troubleshooting
- 6 MPE Commands
- 7 SNA Link Installation Information
- A Messages
- SDLC Link Startup Error Messages
- SDLC Link Driver Error Messages
- SNACONTROL Error Messages
- SNA Transport Error Messages
- SNA Transport Logging Messages
- SDLC Link Shutdown Error Messages
- X.25 Link Failure Error Codes
- X.25 Link Module Configurator Error Codes
- X.25 Link QLLC Internal Error Codes
- NetView Alerts Error Messages
- Network Dump Manager Error Messages
- LAN Error Messages
- B Netview Alerts

Appendix A 263
Messages
LAN Error Messages
84 MESSAGE: The BDMARS expected more DMA data to be transferred
than the host CCMD_IN or CCMD_OUT count requested.
CAUSE: The NIO LAN/console card was prepared to send more data
bytes to the host, but the host did not provide enough buffers. Or the
LAN/ console card expected more data than the host provided.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
85 MESSAGE: The NIO LAN/console card reported unknown advisory
error.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
86 MESSAGE: The NIO LAN/console card reported unknown apstat error.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
87 MESSAGE: The NIO LAN/console card reported unknown fatal error.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
88 MESSAGE: The NIO LAN/console card detects unknown CCMD.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
89 MESSAGE: The NIO LAN/console card reports unknown hard error.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
90 MESSAGE: The NIO LAN/console card detects unknown I/O
command.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
91 MESSAGE: The NIO LAN/console card reports unknown soft error.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.