SNA Link/iX Node Managers Guide (30291-90009)

252 AppendixA
Messages
Network Dump Manager Error Messages
no other messages were generated, issue the SWITCHNMLOG command
(see Chapter 6 , “MPE Commands,” of this manual) and note the name
of the current NM log file. Save the current file
and the previous file, to
prevent accidental purging. Then, call your Hewlett-Packard support
contact, who will need to analyze the “Llio Status” error that was
logged.
DUMP ERROR
$
nnnn
MESSAGE: **** DUMP ERROR $ nnnn
CAUSE: The Network Dump Manager detected an error, but because of
a software bug no message text was supplied or the Dump Manager
incorrectly reported an illegal error number. The error number is
displayed as a hexadecimal value (
nnnn ). Note that an empty or corrupt
dump file might have been produced.
ACTION: If a dump file was created, your Hewlett-Packard support
contact might be able to analyze it. Note what you were doing when the
error occurred, and write down all console messages that were
displayed at the time this message was displayed. Issue the
SWITCHNMLOG command (see Chapter 6 , “MPE Commands,” of this
manual) and note the name of the current NM log file. Save the current
file
and the previous file, to prevent accidental purging. Then, call your
Hewlett-Packard support contact and submit an SR.