SNA Link/iX Node Managers Guide (30291-90009)

224 AppendixA
Messages
SNA Transport Logging Messages
MESSAGE: Link failure, recovery in progress on node NodeName
CAUSE: A recoverable link failure has occurred on the indicated node.
ACTION: Call your Hewlett-Packard support contact.
MESSAGE: Link failure, shutting down the node
NodeName
CAUSE: An irrecoverable link error has occurred on the indicated node.
ACTION: Call your Hewlett-Packard support contact.
MESSAGE: LUNAME IS
LUName
CAUSE: This message is printed for error codes that do not yet have
accompanying diagnostic messages.
ACTION: None; this is a normal event.
MESSAGE: Max Data size greater than LLC frame size on node
NodeName
CAUSE: The value specified in the MAX DATA field of the SNA Node PU
Data screen is too big. This value must be at least 36 less than the
BUFFER SIZE specified in the NS Link Token Ring Data screen.
ACTION: Use NMMGR to change the value of the MAX DATA filed in
the SNA Node PU Data screen or the value of the BUFFER SIZE in the
NS Link Token Ring Data screen.
MESSAGE: Module
ModuleNum rcvd unrecognized msg on node
NodeName
CAUSE: The indicated SNA Transport module has received a port
message it does not recognize.
ACTION: Call your Hewlett-Packard support contact.
MESSAGE: NETVIEW — Sending an alert on node
NodeName
CAUSE: SNA Transport sent an alert to NetView
ACTION: Write down the circumstances and report them to your
HP 3000 system operator.
MESSAGE: NETVIEW ALERT — Dial a bad phone number on node
NodeName
CAUSE: SNA Transport received an error from the SDLC link driver
because it tried to dial with an invalid phone number.
ACTION: Use NMMGR or the configuration file critical summary to
verify that the configured Phone Number is correct.
MESSAGE: NETVIEW ALERT — Dial not completed on node NodeName
CAUSE: The automatic calling unit (ACU) is not turned on.
ACTION: Ensure that the ACU is turned on.