SNA Link/iX Node Managers Guide (30291-90009)

200 AppendixA
Messages
SNACONTROL Error Messages
number is not in the configured PVC range in the DTC X.25
configuration.
ACTION: Issue the NETCONTROL command to verify the X.25 link status
and start the link if necessary. When you check the link’s status, verify
that the X.25 Level 1 status is “connected,” Level 2 is “on,” and Level 3
is “ready.” If the link status is correct, ensure that the SNA/X.25 Link
configuration and the X.25/XL System Access configuration are
compatible with each other and with the X.25 configuration on the DTC
(see Chapter 2 , “SNA Node and Link Configuration,” of this manual). If
the error still occurs, write down the circumstances and call your
Hewlett-Packard support contact.
SNACIERR 21 MESSAGE: COULDN’T OPEN LOG FILE. (SNACIERR 21)
CAUSE: An internal error has occurred.
ACTION: Write down the circumstances and call your Hewlett-Packard
support contact.
SNACIERR 22 MESSAGE: COULDN'T START SNACSC PROCESS. (SNACIERR 22)
CAUSE: Either the SNACSC program module does not exist or an
internal error has occurred.
ACTION: Check the installation of SNA Transport. Use NMMAINT or
the SNACONTROL VERSION command to verify that SNACSC.PUB.SYS is
present and that the version is correct. If the error still occurs, write
down the circumstances and call your Hewlett-Packard support contact.
SNACIERR 23 MESSAGE: BAD START REPLY FROM SNACSC. (SNACIERR 23)
CAUSE: An internal error has occurred.
ACTION: Write down the circumstances and call your Hewlett-Packard
support contact.
SNACIERR 24 MESSAGE: COULDN'T SEND STOP REQUEST TO SNACSC.
(SNACIERR 24)
CAUSE: An internal error has occurred.
ACTION: Write down the circumstances and call your Hewlett-Packard
support contact.
SNACIERR 25 MESSAGE: UNABLE TO ADD NODENAME TO NODE DIRECTORY.
(SNACIERR 25)
CAUSE: An internal error has occurred.
ACTION: Write down the circumstances and call your Hewlett-Packard
support contact.
SNACIERR 26 MESSAGE: COULDN’T RELEASE NODE DIRECTORY. (SNACIERR 26)
CAUSE: An internal error has occurred.