SNA Link/iX Node Managers Guide (30291-90009)
Table Of Contents
- 1 SNA Links Overview
- 2 SNA Node and Link Configuration
- 3 Logging Configuration
- 4 SNA Node Startup and Shutdown
- 5 SNA Link Troubleshooting
- 6 MPE Commands
- 7 SNA Link Installation Information
- A Messages
- SDLC Link Startup Error Messages
- SDLC Link Driver Error Messages
- SNACONTROL Error Messages
- SNA Transport Error Messages
- SNA Transport Logging Messages
- SDLC Link Shutdown Error Messages
- X.25 Link Failure Error Codes
- X.25 Link Module Configurator Error Codes
- X.25 Link QLLC Internal Error Codes
- NetView Alerts Error Messages
- Network Dump Manager Error Messages
- LAN Error Messages
- B Netview Alerts

154 Chapter6
MPE Commands
SNACONTROL STATUS
where IBMNODE is already active could generate this display:
Linkname: IBMNODE Linktype: IEEE8025 Linkstate:
CONNECTED
Physical Path: 48 Data Rate: 16 Mbps
Current Station Address: 10-00-90-00-00-07
Default Station Address: 10-00-90-90-C8-46
Functional Address Mask: 00-00-00-00
Transmits no error: 6614976 Receives no error: 6620830
Transmit byte count: 2368752825 Receives byte count: 2367702513
Transmit errors: 0 Receive errors: 0
NAME TYPE NAU STATE USER TRACE FILE
======== ======= ====== ========== =============== =========================
XPORTPU PU_SSCP 0 ACTIVE MANAGER.SYS OFF
XPORTLU LU_SSCP 1 ACTIVE MANAGER.SYS OFF
XPORTLU LU_SSCP 2 ACTIVE MANAGER.SYS OFF
XPORTLU LU_SSCP 3 ACTIVE MANAGER.SYS OFF
XPORTLU LU_SSCP 4 ACTIVE MANAGER.SYS OFF
XPORTLU LU_SSCP 5 ACTIVE MANAGER.SYS OFF
XPORTLU LU_SSCP 6 RESET MANAGER.SYS OFF
PFA2 DEP_LU 2 PEND_ACT_R PITEST.PUT21R40 NMTC0090.PUB.SYS
PFA3 DEP_LU 3 ACTIVE PITEST.PU2140 OFF
PFA4 DEP_LU 4 PEND_RST_R PITEST.PU2140 OFF
PFA5 DEP_LU 5 PEND_SON PITEST.PU2140 OFF
PFACLASS DEP_LU 1 RESET PITEST.PU2140 OFF
NAME TYPE LFSID STATE USER TRACE FILE
======== ======= ====== ========== =============== =========================
INDLU1 IND_LU 1,0200 PEND_ACT_L PITEST.PUT21R40 OFF
INDLU2 IND_LU 1,0201 PEND_RST_L PITEST.PUT21R40 OFF
INDLU3 IND_LU 1,0202 PEND_RST_N PITEST.PUT21R40 OFF
INDLU4 IND_LU RESET PITEST.PUT21R40 OFF
Terminology The linkname is the same as the node name.
The linktype is “IEEE8025”.
The linkstate is one of the following:
• NOT CONNECTED = The Token Ring device adapter has not been
inserted into the network.
• CONNECTED = The Token Ring device adapter has been inserted
into the network.
• RETRY = The Token Ring device adapter is retrying to insert into
the network.
The physical path is the address of the token ring adapter card.
The data rate is the speed of the token ring (in megabits per second).