Read Before Installing MPE/iX Release 7.5 PowerPatch 5 (Software Release C.75.05) (30216-90371)

Chapter 1

Information to Read Before Installing MPE/iX 7.5 PowerPatch 5

Samba 2.2.8a / SMBMXG3C

You can run NMMGRVER from within NMMGR to update the NMCONFIG file and continue with

changes to the DTS configuration without leaving NMMGR:

a. Run NMMGR and press the [DTS] key at the Main NMMGR screen, you will see a screen that

informs you that the DTS subsystem has been updated. Press the F1 [Do Convert] key. This key will

launch NMMGRVER and you will see:

Utility to convert NM configuration files to be compatible with NMMGR B.07.06.

Fileset to be scanned? NMCONFIG.PUB.SYS

(Enter the file name of your NM configuration file. Then confirm the conversion.)

OK to convert NMCONFIG.PUB.SYS? Y

b. Note the dialog on the screen to verify that the conversion was successful and enter [Return] to return

to NMMGR.

c. Press the [Prior Screen] key to return to the Main NMMGR screen and then press the [DTS] key to

resume your DTS configuration changes.

d. Validate the NMCONFIG file and exit NMMGR.

e. Perform a DTS Shutdown and Restart in order for the configuration changes to take:

:dtccntrl func=shutdown forced=y

:dtccntrl func=restart

After you run NMMGRVER and if your system is using Host-Based Management, your data will be converted

to the equivalent configuration in the new format. If your system is currently using PC-Based Management,

you will see no changes to your configuration.

For more information on the features and behaviors of these enhancements, see the article e” Enhanced

Host-based DTC Management Functionality” in the Communicator for MPE/iX Release 7.5 Power Patch 2.

Complete documentation and information to help you migrate your configuration to Host-Based Management

can be found in the updated Configuring and Managing Host-Based X.25 Links manual that is available

online from:

http://www.docs.hp.com/mpeix/onlinedocs/36939-90057/36939-90057.pdf

Samba 2.2.8a / SMBMXG3C

Before installing or using the Samba/iX product on MPE/iX, please visit

http://jazz.external.hp.com/src/samba/ for important installation instructions.

Migrating from Samba 2.0.7

Users of Samba 2.0.7 need to be aware of the following issues before installing Samba 2.2 .8a. For complete

information about Samba 2.2.8a, please see http://jazz.external.hp.com/src/samba/ (or

/usr/local/samba/ReadME.mpe after this patch has been installed).