Read Before Installing MPE/iX Release 7.0 Express 1 Non-Platform Software Release (C.70.01) HP e3000 MPE/iX Computer Systems Edition 3 Manufacturing Part Number: 30216-90327 E0801 U.S.A.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for direct, indirect, special, incidental or consequential damages in connection with the furnishing or use of this material.
Contents 1. Information You Need Before Installing MPE/iX 7.0 Express 1 Announcements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For SAMBA Users: Special Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DCE/RPC 1.2.1 Not in Express 1 . . . . . . . .
Contents 4
Information You Need Before Installing MPE/iX 7.0 Express 1 Announcements 1 Information You Need Before Installing MPE/iX 7.0 Express 1 Announcements • 9x7s not supported in 7.0 The decision has been made to not support 9x7s on the 7.0 release. The final version of MPE/iX Release 7.0 will not boot on 9x7 systems. • 6250 half inch tapes will not be supported as a distribution media in 7.0. As a matter of fact we are going to end the support for all releases sometime this year.
Information You Need Before Installing MPE/iX 7.0 Express 1 Release Notes Release Notes For SAMBA Users: Special Installation Instructions Before installing or using the Samba/iX product on MPE/iX 7.0 Express 1, please visit http://jazz.external.hp.com/src/samba/ for important installation instructions. DCE/RPC 1.2.1 Not in Express 1 Unlike what is stated in the 7.0 Express 1 Communicator, the MPE/iX 7.0 Express 1 release does not contain the new versions of the 2 products (DCE/RPC 1.2.1).
Information You Need Before Installing MPE/iX 7.0 Express 1 Software Product and System Patches Software Product and System Patches Software Product PATCH ID WAN, ACC support for IOVA ACCGD50 A Predictive Support CONGD15 A Mesa based Predictive OSPLXD2 C QUELXP5 C Apache PH.
Information You Need Before Installing MPE/iX 7.
Modem Connections on A- and N-Class 2 Modem Connections on A- and N-Class The modem that is supported on the Remote console port on the N-Class and A-Class systems is the MultiTech Model MT5634ZBA (HP part No: 0960-1074). The physical connection is: N-Class/A-Class 24542M Modem or cable that comes with modem Remote console port The cable is connected to the 9 pin Remote Console Serial port on the coreI/O card. Connect the modem to the system and to the phone line.
Modem Connections on A- and N-Class =================================== If the parameters are not correct for the Remote Console Serial port, then answer “Y” to the second prompt.
Modem Connections on A- and N-Class Modem Presence: always connected Do you want to modify it? (Y/[N]) n n Command execution may take 25 seconds. -> Settings have been updated. GSP Host Name: GSP> ===================================== Now enable the remote console: GSP Host Name: GSP> er ER Current remote/modem port access: GSP Do you want to modify this configuration? (Y/[N]) y y Remote/modem serial port access options: [L]ocked-out: Lock out all dial-in access.
Modem Connections on A- and N-Class Current remote/modem port access: GSP GSP Host Name: GSP> ===================================== This should be all that is needed to enable the remote console modem port. If you are using a terminal emulator on a PC such as WRQ Reflections, then go to the connection menu and select 'disconnect'.
