NS3000/iX Operations and Maintenance Reference Manual (36922-90042)

Chapter 6 91
Using NETTOOL
Using the NETTOOL Tools
periods or blanks (for example,
15.123.44.98).
MAPPINGS Select this item to obtain information about the
correspondence between IP addresses and link
addresses or to delete mappings from the table. A new
menu will appear presenting you with the choices as
described:
MAPPING Select to display all mappings between
IP address and link address for those
entries selected by subnetfilter and
addrfilter.
DELMAPPING Select to delete mapping information of
IP address to network address. Syntax
is DELMAPPING ipaddress. For
example,
DELMAPPING 15.13.128.1
TOTALS Select to display total number of
mappings.
filters Select to see current filter settings for
this menu. Also displays the global
settings (INFILE, OUTFILE, messages
flag, data flag, and menus flag)
subnetfilter Select to set the subnet filter. Specify
the name used in the NETCONTROL
command.
addrfilter Select to set the address filter. You will
be prompted for the address type.
Enter IP, ETHER802, X25, or NONE as
required.
sorting Select to specify the sorting method for
the output of the MAPPING option. You
will be prompted for the sort type.
Enter IP or LINKADDR as desired.
ROUTING Select this item to obtain information about the
gateways used to access different subnets. A new menu
will appear presenting you with the choices as
described:
ROUTING Select to display routing information as
specified by the networkfilter and
gatewayfilter settings.
DELROUTING Select to delete specified routing.
GATELIST List all started DCNs, (gateways).