NS3000/iX Operations and Maintenance Reference Manual (36922-90042)

Index
Index 229
Numerics
802 chip restarts, 190
A
aborted frames received, 182
aborted frames sent, 182
B
Bad_card_on, 199
Bmgr_queued_aloc_on, 198
broadcast reads, 197
broadcast writes, 197
buffer size, 179
C
cable type, 179
card, 70
carrier losses, 187
clear to send (CTS), 182
code or align error, 204
commands
COMPARE, 87
DATA, 84
DEBUG, 84
DO, 85
EXIT, 85
HELP, 85
HELP ALL, 85
HELP BROWSE, 85
HELP command, 85
HELP COMMANDS, 85
INFILE, 85
LINKCONTROL, 107
LINKCONTROL STATUS, 107
LINKCONTROL TRACE, 107
LISTREDO, 85
MAIN, 85
MANUAL, 85
MENUS, 85
MESSAGES, 85
NETCONTROL, 107
NETCONTROL ADDLINK, 107
NETCONTROL DELLINK, 107
NETCONTROL START, 107
NETCONTROL STATUS, 107
NETCONTROL STOP, 107
NETCONTROL TRACE, 107
NETCONTROL UPDATE, 107
NETCONTROL VERSION, 107
NETDIR, 87
NSCONTROL, 107
NSCONTROL ABORT, 107
NSCONTROL AUTOLOGON, 107
NSCONTROL LOADKEYS, 107
NSCONTROL LOG, 108
NSCONTROL SERVER, 108
NSCONTROL START, 108
NSCONTROL STATUS, 108
NSCONTROL STOP, 108
NSCONTROL VERSION, 108
OUTFILE, 85
QUIT, 85
REDO, 85
RESUMENMLOG, 108
SETVAR, 86
SHOWNMLOG, 108
SHOWVARS, 86
SUMMARY, 87
SWITCHNMLOG, 108
VERSION, 86
COMPARE command, 87
Config_on, 198
configured, 198
connect duration, 181
connect timeout, 180
CRC, 183
CRC errors, 183, 189
crc or maxsize error, 203
Ctrl_out_active, 198
Ctrl_response_pending, 199
CTS
clear to send, 182
CTS carrier losses, 182
current multicast address list, 194, 201, 209
current multicast addresses, 186
current receive filter, 185
current station address, 185, 193, 194, 200, 209
Cyclic Redundancy Check (CRC), 183
D
data bytes received, 181
data bytes sent, 181
Data Carrier Detect (DCD), 182
DATA command, 84
data frames received, 182
data frames sent, 181
data rate, 192
DCD, 182
Data Carrier Detect, 182
DCD carrier losses, 182
DEBUG command, 84
default station address, 185, 193, 194, 201
DO command, 85