NS3000/iX Operations and Maintenance Reference Manual (36922-90042)

220 AppendixA
LINKCONTROL Command
NS 3000/iX LAPBMUX Link Statistics
linkname ;STATUS=CONFIGURATION command:
Linkname: PLAPLNK7 Linktype: PCI LAPBMUX Linkstate: CONNECTED LEVEL 2
Physical Path: 0/6/2/1.7
Physical interface V.35 LAPB parm T1 :sec 3
Transmission speed 20480009 LAPB parm N2 :retry 20
Clock source External LAPB parm K 7
Local mode DTE Module Count 8
Connect timeout :sec 900 Buffer size :bytes 4096
Adapter timeout :sec 10
Physical Path — The Physical Path field displays the current physical
path for the adapter card as specified in the NMCONFIG configuration
file.
NOTE On PCI LAPBMUX links, the physical path generally has more
components and is a “longer” path (e.g., 0/6/0/1.2, in which 0/6/0/1 is the
path .2 is the port number) along with the port number associated with
that link. The output for PCI links is different from that HP-PB.
Physical Interface — The Cable Type field displays the cable type
that is currently connected to the PSI card. This data is provided by the
PSI card and cannot be configured through NMMGR. The possible
values for this field are as follows:
• RS232
• V.35
• None
Transmission Speed — The Transmission Speed field displays the
current transfer rate, or clocking, configured for the node in the
NMMGR Link screen. If modems are used, the modems will control the
clocking. The ACC card transmits at the clocking setting of the modem
and ignores the value configured in this field.
Clocking Source — The Clocking source field displays the clocking,
configured for the node in the NMMGR Link screen. The possible types
of clocking source are:
• External
• Internal
If modems are used, the modems will control the clocking and clocking
source should be configured as “External”. If the node is connected to
other node which requires clocking, then it should be configured as
“Internal”.
Local Mode — The Local Mode field displays the value specified for
local mode in the NMMGR link screen. The possible values for this field