NS3000/iX Operations and Maintenance Reference Manual (36922-90042)

Chapter 7 119
Commands
NETCONTROL DELLINK
NETCONTROL DELLINK
Dynamically deletes a configured network link from the active network
interface.
Syntax
NETCONTROL DELLINK= linkName ; {NET = niName }
{GATE= gatehalfName }
Parameters
DELLINK= linkName
Specifies the name of the link to be dynamically deleted
from the specified active NI. The linkname must be a
valid NI link name configured in the NMMGR Link
Selection screen and also in the Network Interface
Links screen under the specified “niname” or
“gatehalfname” NI. If already deleted, a “NOT
STARTED” error will occur, or if the linkname is not
valid, a “NOT CONFIGURED” error will occur.
NET=
niName
Specifies the name of an active network interface under
which the specified linkname is configured. Enter any
valid NI name from the NMMGR Network Interface
Configuration screen which is not a gatewayhalf. If this
NI is not active, a “NOT STARTED” error will occur.
GATE=
gatehalfName
Specifies the name of an active gateway half network
interface under which the specified linkname is
configured. Enter any valid gatehalf NI name from the
NMMGR Network Interface Configuration screen. If
this NI is not active, a “NOT STARTED” error will
occur.