NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 5 75
LAN Network Interface Configuration Screens
Protocol Configuration
Protocol Configuration
The Protocol Configuration screen (#113) in Figure 5-4 is displayed
when you press the
[Go To PROTOCOL] function key at the LAN Network
Interface Configuration screen (Figure 5-3). It is also displayed when
you type the path name:
@NETXPORT.NI.
NIname .PROTOCOL
in the command window of any screen and press the
[Enter] key, where
NIname is a configured LAN NI.
Figure 5-4 Protocol Configuration Screen
For the LAN NI, you configure the IP, probe, and ARP protocols. Choose
the protocol to configure, and press the corresponding function key.