NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

208 Chapter10
100VG-AnyLAN Network Interface Configuration Screens
100VG-AnyLAN Network Interface Configuration
100VG-AnyLAN Network Interface
Configuration
The 100VG-AnyLAN Network Interface Configuration screen (#288) in
Figure 10-3 is displayed when you select an NI name and the NI type
VG100LAN at the Network Interface Configuration screen (Figure 10-2)
and press the
[Add] or [Modify] function key. It is also displayed when you
type the path name:
@NETXPORT.NI. NIname
in the command window of any screen and press the [Enter] key, where
NIname is a configured VG100LAN NI name.
Figure 10-3 VG100LAN Network Interface Configuration Screen
The VG100LAN network interface (NI) module serves to interface the
upper layers of the transport product to the link layer. This screen
supplies the information required for that interface. All of the fields,
with the exception of the HP UPC number, are used for internal
resource allocation.
Press the
[Save Data] function key to transfer the data displayed on the
screen to the configuration file you are creating or modifying. Verify
that the data record has been created by checking that the Data flag is
set to Y. From this screen you proceed to the screens used to configure
the VG100LAN link and internetwork routing.
Choose the item you wish to configure, and press the corresponding key.