NS3000/iX Error Messages Reference Manual (36923-90043)

ManualsBrandsHP ManualsSoftwareMPE/iX 7.0 Operating System

121

122

123

124

125

126

127

128

129

130

124 Chapter12

NETXPORTERR Error Messages

ACTION:

1. Consult the SHERLOCK diagnostics to determine the cause of the link

error. If no link error is indicated, see Appendix A , “Submitting a

CR,” of this manual.

2. Consult the SHERLOCK diagnostics to determine the cause of the link

error. If no link error is indicated, see Appendix A , “Submitting a

CR,” of this manual.

3. Consult the SHERLOCK diagnostics to determine the cause of the link

error. If no link error is indicated, see Appendix A , “Submitting a

CR,” of this manual.

4205 MESSAGE: linkName DEVICE IN BOTH ADDLINK AND DELLINK

FUNCTIONS.

CAUSE: The same linkname is the object of both the ADDLINK and

DELLINK option in the NETCONTROL command above. This is not

permitted.

ACTION: Do the ADDLINK and DELLINK on separate NETCONTROL

command lines when the same linkname is used for both functions.

4206 MESSAGE: HOST — DTC CONFIGURATION MISMATCH FOR DEVICE

linkname. ENSURE HOST NAME IS CONFIGURED ON DTC.

CAUSE: The host name and/or host link name is not conﬁgured for the

DTC name and card number speciﬁed with this device.

ACTION: Ensure that the DTC name and card number conﬁgured for

this device are correct. Then use the DTC Manager to add the host

name and host link name to the conﬁguration for the appropriate DTC

and card number. Restart the DTC card.

4207 MESSAGE: HOST — DTC VERSION MISMATCH FOR DEVICE

linkname.

CAUSE: The version number of the Remote Link Manager (RLM) on the

host and the version number of MARS on the DTC are incompatible.

ACTION: Ensure that the DTC name conﬁgured for this device is

correct. Contact your Hewlett-Packard support engineer to correct the

problem.

4208 MESSAGE: X.25 CARD DOWN ON DTC FOR DEVICE linkname.

CAUSE: The X.25 code must be downloaded on an X.25 card on the DTC

before the Network Transport attempts to open the link.

ACTION: Ensure that the DTC name and card number conﬁgured for

this device are correct. Using the Openview DTC Manager, download

X.25 for the appropriate DTC and card.