NetBase for MPE Reference Guide

NetBase Shadowing

5-7

There are also node level parameters associated with shadowing. These parameters affect each node

in the system. Before modifying any of the node level shadowing parameters, please contact the

Technical Support group. The node level parameters may be listed by entering the list command l

followed by the node number or node name, in this case, 1:

Note. If you have a node name that matches one of the CONFIG categories (SHADOW or

NFA), you will have to use the node number.

C> L 1

Node Number........................ 1

System Name........................ MASTER

Startup Access (S/I/O/A/W)......... A

Node Name.......................... MASTER.QUESTS.COM

Node Connection Timeout............ 180

SPOOL - Direction (N/E/I/B)........ B

SPOOL - Allow incoming job streams. Y

SPOOL - Enable Export Flow Control. N

SHADOW - Direction (N/E/I/B)....... B

SHADOW - Export queue size......... 4096

SHADOW - Import queue size......... 4096

SHADOW - Post queue size........... 4096

SHADOW - Initial Post Priority..... DEFAULT

SHADOW - Post Inactivity Timeout .. 0

SHADOW - Enable Post Logging....... N

SHADOW - Log all Post Transactions. N

SHADOW - Save Process Info on Post. N

SHADOW - Abort Post on Errors...... N

SHADOW - Buffered Exporting........ Y

SHADOW - Transfer mode only........ N

SHADOW - Transfer Single Queues.... N

SHADOW - Transfer ACK Frequency.... 0

SHADOW - Post Directory Filename .. DEFAULT

The node level SHADOW parameters affect the queuing and logging of updates, process priority and

the buffering feature. The rest of the parameters enable and modify other features of NetBase

shadowing. Turn to Chapter 3 “Using CONFIG” for a description of each of these parameters, their

default values and when they take effect in NetBase.