NBSpool for MPE Reference Guide

Troubleshooting NBSpool
7-19
Error Message Explanation/Action
TOO MANY PARAMETERS SPECIFIED
You specified too many parameters for this
command.
*2
UNABLE TO ACCESS REMOTE NODE
NBSpool cannot access the remote node as
necessary for this command. Ask the network co-
ordinator to research this problem.
*2
UNABLE TO ACCESS REMOTE PROGRAM
“!”
NBSpool cannot access the remote copy of the
program you have specified.
*2
UNABLE TO COMMUNICATE WITH
REMOTE NODE
NBSpool’s communication with the remote mode
has failed. Ask your network administrator to
verify the situation with the remote node.
*2
UNABLE TO CONTINUE COMMAND DUE
TO COMMUNICATION ERROR
The communication between systems required by
your command failed. Ask your system operator
to verify that communication is still available,
and retry your command.
Unable to execute this command on an
MPE/XL system
The command you entered is inappropriate for a
precision-architecture machine.
Unable to locate a previously created
BROWSE folder file
To use the
BROWSE
command without a subset
specified requires that a previous
BROWSE
command with a subset specified was executed in
this session.
UNABLE TO LOG ON TO REMOTE NODE
NBSpool cannot log on to the remote computer.
Ask the network co-ordinator to research this
issue.
*2
UNABLE TO OBTAIN TERMINAL STATUS
NBSpool cannot determine the terminal’s status.
Ask your system manager to explore the issue.
*2
UNABLE TO SAVE ON REMOTE
NBSpool cannot save a new file on the remote.
This message appears from the remote is
response to a data block request, possibly
indicating a lack of disk space on the remote.
*2
UNABLE TO SUBMIT FILE
NBSpool cannot submit a file to
NRJE
.
*2
UNABLE TO TEXT THIS OPEN SPOOL FILE
The spool file you specified cannot be
TEXT
ed in
its
OPEN
state. Wait until it is in a
READY
state,
and then
TEXT
.