NBSpool for MPE Reference Guide

Troubleshooting NBSpool
7-17
Error Message Explanation/Action
THIS COMMAND DOES NOT SUPPORT
STRING SUBSETS
You attempted to specify a string subset for a
command which does not operate with them.
*2
THIS COMMAND IS NOT ALLOWED IN AN
XEQ FILE
The command you have specified in an
XEQ
file
cannot be performed (in an
XEQ
file).
*2
THIS COMMAND IS NOT AVAILABLE IN
INPUT MODE
You may not use this command during
INPUT
mode.
*2
THIS COMMAND IS NOT AVAILABLE IN
OUTPUT MODE
You may not use this command during
OUTPUT
mode.
*2
THIS COMMAND IS ONLY ALLOWED IN
INTERACTIVE MODE
The command you have specified in a job can be
used only when NBSpool is running
interactively.
*2
THIS COMMAND IS ONLY VALID IN AN XEQ
OR WHILE LOOP
This command is limited to use within
XEQ
files
and
WHILE
loops.
*2
THIS COMMAND MUST BE EXECUTED ON
AN HP-COMPATIBLE TERMINAL
You entered a command that requires an HP-like
terminal, and your terminal does not qualify.
*2
THIS COMMAND REQUIRES AT LEAST A
FILE NAME
You must specify a filename with this command.
*2
THIS COMMAND REQUIRES AT LEAST A
SPOOL FILE SUBSET
You must specify a subset with this command.
*2
THIS COMMAND REQUIRES AT LEAST
TWO PARAMETERS
The command you have selected performs only
when a minimum of two parameters are
specified.
*2
THIS COMMAND REQUIRES OP OR SM
CAPABILITY
You must have
OP
or
SM
capability to perform
this command. Ask your system manager for
help.
*2
THIS ENVIRONMENT IS CURRENTLY
USING AN NS SERVICE
Some other
NS
service is in use on the remote
system. Close the
DSLINE
or use another
DSLINE
.
This is a YES or NO question.
You did not respond properly to the question.
Enter
YES
or
NO
.
THIS KEYWORD HAS NO PARAMETERS
You may not specify parameters with this
keyword.
*2
THIS KEYWORD IS VALID ONLY FOR THE
COPY COMMAND
The keyword you have specified applies to the
COPY
command only.
*2