NBSpool for MPE Reference Guide

Chapter 7
7-10
Error Message Explanation/Action
INVALID NETBASE TAPE LABEL
The tape you loaded has an invalid NetBase
label. Without a valid NetBase label, you may not
use NBSpool to access its files.
INVALID NETWARE QUEUE NAME
Ask your network adminstrator to correct the
queue name.
*2
INVALID NETWARE SERVER NAME
NBSpool has detected an invalid NetWare server
name. Ask your network administrator to correct
the issue.
*2
INVALID NODE NUMBER SPECIFIED
The node number you specified does not exist.
Verify and re-enter.
*2
Invalid or missing library file
The file
QUESTXL
is missing or corrupt. Restore
it from your tape.
INVALID PARAMETER FOR NATIVE MODE
SPOOLER
The parameter you specified is not suited for a
NM
spooler. Delete the parameter, and execute
the command.
*2
INVALID PASSWORD
The password you specified is inaccurate. Verify
the password, and re-enter (or edit the job).
INVALID POSITION IN DATA
The position you have indicated is inappropriate
for the change you are requesting. Reposition the
cursor.
INVALID POSITION IN FILE
The position you have indicated in the file is
inappropriate for the command you have
selected. Reposition the cursor.
INVALID PRINTER TYPE SPECIFIED
The printer type you specified does not exist.
Turn to the “PRINT” section in Chapter 3 for
more information on printer definitions.
*2
INVALID RECORD SIZE SPECIFIED
Research the appropriate record size, and re-
enter.
*2
INVALID SPOOK TAPE FORMAT
The tape you loaded has a
SPOOK
format. You
may not use NBSpool to access its files.
INVALID SPOOL FILE
The spool file you specified does not exist.
INVALID STATE SPECIFIED
The state you specified does not exist.
*2