NBSpool for MPE Reference Guide

Chapter 7
7-8
Error Message Explanation/Action
EXPECTED A VALUE FOR NUMBER OF
SECTORS
The value you entered was illogical for number of
sectors. Re-enter your value.
*2
EXPECTED AN INTEGER BETWEEN 1 AND
9999, “@”, OR “SPOOK”
You entered a value NBSpool did not anticipate.
Re-enter, according to the options listed.
*2
EXPECTED ONE OR MORE SORT
SPECIFICATION
The syntax you entered lacked a sort
specification. Verify your syntax, add a sort
option, and execute.
*2
EXPECTED REEL #!, FOUND REEL #!
The reel found does not match the reel necessary
for the restore. Please locate and load the correct
tape.
FILE IS NOT A VALID NBSpool ARCHIVE
FILE
The file you have specified is not an NBSpool
ARCHIVE
file. You may not extract files from this
file. Verify the name and re-enter.
*2
FILE NOT IN PROPER STATE
ALTER
cannot change the state of the spool file.
FIRST LINE IS BEYOND END OF FILE (Line
!)
The spool file is corrupt.
*1
HP-UX TRANSPORT SOFTWARE NOT
INSTALLED
Ask your network administrator to install the
HP_UX
transport software. Once this is
accomplished, you may use this command.
*2
INCOMPATIBLE PARAMETERS HAVE BEEN
SPECIFIED
The parameters you have specified do not work
in combination. Edit your command, and execute
it.
*2
INPUT LINE IS GREATER THAN 132
CHARACTERS
Your input line exceeds
132
characters.
*2
INSUFFICIENT CAPABILITY TO SPECIFY
THIS USERSET
You do not have sufficient security clearance to
specify this userset.
*2
INTERLEAVE IS INVALID FOR 1 COPY: Use
ALTER ...;NEWTIME
The
INTERLEAVE
option is for use with multiple
copies of multiple documents.
*2
INTERLEAVE IS INVALID FOR ONLY 1 FILE
The
INTERLEAVE
option is for use with multiple
copies of multiple documents.
*2
INVALID ARCHIVE FILE
CHARACTERISTICS: Must be
REC=128,1,F,BINARY
You did not specify a valid archive file.