NBSpool for MPE Reference Guide

Chapter 1
1-14
6. Some other settings in
NMMGR may benefit from adjustment. NBSpool customers frequently
increase the
Retransmission Lower Bound
to
8
, as well as
Initial Retransmission Interval
and
Max Retransmissions per Packet
.
Note. If you change a configuration setting in
NMMGR, you may need to stop and
restart the network for the change to take effect.
7. If you changed the
NMMGR entry for the printer, you will need to clear the cache for it so that
the new information is accessed. To do so, enter:
:NETTOOL.NET.SYS
>NAMEADDR
>CACHE
>DELPATH
>
printernode.domain.org
>EXIT
8. To validate your changes, first repeat pinging the node by its name via
NETTOOL. If that
succeeds, try sending output to it via NBSpool.