NBSpool for MPE Reference Guide

NBSpool Input Commands
4-35
WIDTH
The WIDTH command changes the display width to either
80
or
132
columns. The command will
only work on Hewlett-Packard terminals that support this line width. All other terminals will
ignore this command.
The
WIDE option is reset when the program terminates or following the completion of a subsequent
VIEW command that specifies WIDE.
WIDTH Syntax
I> WIDTH {WIDE }
{NARROW}
User Tip. This command may be abbreviated to
W
.
WIDTH Parameters
Parameter Description
WIDE
This parameter changes the display to
132
columns.
NARROW
This parameter changes the display to
80
columns.