NBSpool for MPE Reference Guide

Installation and Configuration

1-7

Network Printing

This section provides information and instructions on configuring HP LAN printers to work with

JetDirect cards. The following procedures are covered in this section:

• Enabling Ethernet

• Adding the LAN Printer to the HP 3000

• Sending a Test Print Job

Enabling Ethernet

This section provides instructions on enabling Ethernet. You must enable Ethernet to print to LAN

printers..

1. Run the

NMMGR

program. The

NMMGR

program screen #1 will be displayed.

:NMMGR

2. Press

Open Config

. The screen shown below is displayed.