NBSpool for MPE Reference Guide

NBSpool Output Commands
3-119
WIDTH
The
WIDTH
command changes the display width on certain Hewlett-Packard terminals to either
80
or
132
columns. The command will only work on Hewlett-Packard terminals that support this line
width. All other terminals will ignore this command. The
WIDE
option is reset when the program
terminates or following the completion of a subsequent
VIEW
command that specifies
WIDE
.
WIDTH Syntax
O> WIDTH {WIDE }
{NARROW}
User Tip. This command may be abbreviated to
W
.
WIDTH Parameters
Parameter Description
WIDE
This parameter changes the display to
132
columns.
NARROW
This parameter changes to
80
columns.