NBSpool for MPE Reference Guide

NBSpool Output Commands
3-97
SUBMIT Parameters
Parameter Description
subset
This parameter specifies the subset of spool files to be submitted. Turn to
Chapter 2 for information on using subsets.
wsid
This parameter specifies the workstation ID to which the spool files will be
submitted.
front
This parameter specifies the name of an MPE file that will be placed in
front of each spool file in the subset.
back
This parameter specifies the name of an MPE file that will be placed at the
end of each spool file in the subset.
JOBNAME
This parameter specifies the job name used when the spool files are
submitted. The default name used is
NRJE
.
lines
This parameter specifies the number of lines per page on the report. The
default value is
60
lines per page.
MAXREC
This parameter specifies the maximum expected record size. Must be an
integer between
40
and
252
. Records up to 504 bytes are supported without
truncation, since NBSpool breaks up and reassembles large records.
newpri
This parameter specifies the output priority of the original spool file after it
has been submitted. The value may be from
0
to
14
.
priority
This parameter specifies the priority of the submitted spool file. The value
must be between
1
and
14
.
printername
A
1
to
8
character name of a printer definition defined in the
PRINTDEF
program. This allows certain default information to be overridden, such as
lines per page, perforation control etc.
ASK
This parameter prompts at each file to include for processing.
PURGE
This parameter specifies that the original spool file is to be purged after it
is successfully submitted.