NBSpool for MPE Reference Guide

Chapter 1
1-2
NBSpool Stand-Alone Installation
This section provides information and instructions on installing NBSpool by itself. Follow the
instructions in this section if you are installing or updating NBSpool.
Note. If this is an upgrade, be sure that no one is accessing NBSpool or VISTA Plus
before you perform the upgrade. You must also stop all NBSpool background
processes before performing the upgrade.
1. Logon as MANAGER.SYS.
:HELLO MANAGER.SYS
2. Restore the install job.
:RESTORE;NBINSTAL.JOB.@;LOCAL
3. Add the passwords for
MANAGER.SYS to the !JOB command in the first record of the NBINSTAL
file.
4. If you are using SECURITY/3000, enter the following command:
:NEWACCT NETBASE,MGR;PASS=QUEST
5. If you are using VESOFT’s
STREAMX utility, do one of the following:
• Disable
STREAMX and use the MPE STREAM command.
• Modify the installation job and change each
STREAM command to STREAMX.