NBSpool for MPE Reference Guide

NBSpool Output Commands
3-75
PURGE Examples
In the following example, the
SHOW
command is first used to display the files that will be purged.
O> SHOW LP
4 Spool files Qualify
DFID FILENAME JOB USER NAME SECTORS DEVICE PRI WHEN
CREATED
-------------------------------------------------------------------------
--
#O3445 LP #S’457 MGR.NETBASE 48 LP 1 10/06/88
17:04
#O3436 LP #S457 MGR.NETBASE 48 LP 1 10/06/88
17:04
#O3450 LP #S’457 MGR.NETBASE 48 LP 1 10/06/88
17:04
#O3451 LP #S’457 MGR.NETBASE 48 LP 1 10/06/88
17:04
Total of 192 sectors for displayed spool files
In the following example, the spool files to be purged are specified using selection criteria. If only
one spool file qualifies, NBSpool will proceed to purge it. If more than one qualify, NBSpool will
ask for permission to purge the spool files.
O> PURGE 3451
1 Spool file Qualifies
DFID FILENAME JOB USER NAME SECTORS STATUS
-------------------------------------------------------------------
#O3451 LP #S’457 MGR.NETBASE 48 Purged
O> PQ 3451
Purging 1 file for 48 sectors...