MPE/iX Error Messages Manual Vol 2 (32650-90902)

Chapter 10 415
Store/Restore (Native Mode) and TurboSTORE/iX I
(S/R)
'VOLCLASS=volumeclassname' (S/R 396)
CAUSE You entered a volumeclass name that was more than 16
characters.
ACTION Enter a volumeclass name that has 16 characters or less.
397 MESSAGE EXPECTED 'volumeclassname' AFTER 'VOLCLASS='
WHERE volumeclassname IS THE NAME OF A VOLUME
CLASS THAT IS ON A VOLUME SET CURRENTLY
MOUNTED ON YOUR SYSTEM. SYNTAX
'VOLCLASS=volumeclassname' (S/R 397)
CAUSE You did not specify a volumeclass name.
ACTION Check the syntax and retype the command.
398 MESSAGE 'VOLCLASS' OPTION CANNOT BE USED WITH THE
'LISTDIR' OPTION. (S/R 398)
CAUSE Volclass and listdir options are not allowed on the same
command line.
ACTION Delete either volclass or listdir option and retype the
command.
401 MESSAGE 'VOL' OPTION CANNOT BE USED WITH THE
'VOLCLASS' OPTION (S/R 401)
CAUSE Vol and volclass options are not allowed on the same
command line.
ACTION Delete either vol or volclass option and retype the
command.
402 MESSAGE 'VOL' OPTION CANNOT BE USED WITH THE 'DEV'
OPTION (S/R 402)
CAUSE Vol and dev options are not allowed on the same command
line.
ACTION Delete either vol or dev option and retype the command.
403 MESSAGE 'VOL' OPTION HAS BEEN REDUNDANTLY SPECIFIED
(S/R 403)
CAUSE The VOL option was entered more than once.
ACTION Information only.
404 MESSAGE EXPECTED '=volumename' AFTER 'VOL' OPTION.
SYNTAX
'VOL=volumename' (S/R 404)
CAUSE You did not type vol parameter correctly.
ACTION Check the syntax and retype the command.