MPE/iX Error Messages Manual Vol 2 (32650-90902)

Chapter 9 365
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
account.
ACTION None. Information only.
0084 MESSAGE ** group "!" is replaced **
0085 MESSAGE ** boottape ! is generated **
0088 MESSAGE **warning** new configuration group is not
yet defined
0092 MESSAGE ** no configurators are modified **
CAUSE This information message appears when a global SHOW
command is entered and no changes have been made
through any of the configurators.
ACTION None.
0100 MESSAGE keeping to group !
CAUSE This message occurs when a newgroup is specified and you
enter a KEEP without a group name.
ACTION None. Information only.
0105 MESSAGE **note** factory user mode is "ON"
0500 MESSAGE **warning** group "!" is already the current
base
CAUSE This message occurs when you attempt to replace the
current basegroup through the BASEGROUP command
using the same name as the another group name.
ACTION Select another group name.
0501 MESSAGE **warning** You haven't kept your changes
yet! These changes
0502 MESSAGE will be lost. Do you still want to continue
(yes/no)?
CAUSE This message occurs in all the global and configurator
modules when you either try to exit without holding
changes or exit SYSGEN without keeping changes.
ACTION Respond yes to exit or no to enter the HOLD or KEEP
command.
0504 MESSAGE **warning** control Y not available
0510 MESSAGE **warning** There are no configuration files
in group !
0511 MESSAGE creating a default set!
1000 MESSAGE **warning** Current account is not 'SYS'.
1003 MESSAGE **error** new group name ! is not valid. !
will be used.