MPE/iX Error Messages Manual Vol 2 (32650-90902)

Chapter 1 31
Vol. II Chapter 1
Loader, Native Mode
NL.PUB.SYS. (LDRERR 357)
CAUSE Failed to initialize the semaphore for the system libraries
loaded file table entry.
ACTION Reboot. If this is unsuccessful, call your Hewlett-Packard
Representative.
358 MESSAGE Failed to retrieve an existing entry from the
loaded file table. (LDRERR 358)
CAUSE Failed to retrieve existing entry from the loaded file table.
ACTION Try running the program again. If this is unsuccessful,
call your Hewlett-Packard Representative.
359 MESSAGE Failed to create the object for the loaded
file table. (LDRERR 359)
CAUSE Unable to create the object for the loaded file table.
ACTION Reboot. If this is unsuccessful, call your Hewlett-Packard
Representative.
360 MESSAGE Failed to create the table for loaded file
table. (LDRERR 360)
CAUSE Unable to create the table for the loaded file table.
ACTION Reboot. If this is unsuccessful, call your Hewlett-Packard
Representative.
400 MESSAGE No more process XRT entries available.
(LDRERR 400)
CAUSE The process XRT is full.
ACTION Call your Hewlett-Packard Representative.
401 MESSAGE No more system XRT entries available. (LDRERR
401)
CAUSE The system XRT is full.
ACTION Call your Hewlett-Packard Representative.
402 MESSAGE No external call exists for the given EXEC
and XLEAST levels. (LDRERR 402)
CAUSE The combination of call and execute privilege levels
specified is not supported.
ACTION Change the call and execute levels to a supported
combination.
403 MESSAGE Failed to create an object for the process
XRT TABLE. (LDRERR 403)
CAUSE Unable to create the XRT for the new process.
ACTION Retry. If this is unsuccessful, call your Hewlett-Packard