MPE/iX Error Messages Manual Vol 2 (32650-90879)

270 Chapter8
System Startup, Shutdown, and Configuration
Class Errors
Class Errors
Class Error 1
Class Error 1
Class error 1 is composed of three types of processor failures: register file, execution unit,
and instruction unit.
Register File Failure
Register file messages take the form:
11xx
where:
xx = detailed error number
00 MESSAGE No message. System halts. (E)
CAUSE Undefined error occurs at the start of the test.
ACTION Contact your Hewlett-Packard Support Representative.
01 MESSAGE No message. System halts. (E)
CAUSE Test of the general registers 1, 2, and 31 fails. Second
possible cause of the error may be the execution unit.
Third possible cause of the error also may be the
instruction unit.
ACTION Contact your Hewlett-Packard Support Representative.
02 MESSAGE No message. System halts. (E)
CAUSE Test of the general registers fails. Second possible cause of
the error may be the execution unit. Third possible cause
of the error also may be the instruction unit.
ACTION Contact your Hewlett-Packard Support Representative.
03 MESSAGE No message. System halts. (E)
CAUSE Test of the recovery counter or external interrupt enable
mask fails. Second possible cause of the error may be the
execution unit. Third possible cause of the error also may
be the instruction unit.
ACTION Contact your Hewlett-Packard Support Representative.
04 MESSAGE No message. System halts. (E)
CAUSE Test of the temporary control registers fails. Second
possible cause of the error may be the execution unit.
Third possible cause of the error also may be the
instruction unit.